Westalee Ruler Foot Medium Shank
The perfect foot to allow you to quilt with Rulers. Medium foot is an adjusted low shank foot for Pfaff or Bernina users.
Medium foot - Necessary to - adjust settings on Pfaff for Medium foot
you will need to use either the Spring Free Motion setting for the Expression and Creative range of machines,
or put your presser foot into the mezzanine position - free motion position - darning position (refer to your manual).
Medium Shank Foot & Low Shank Templates
2010, 2014, 2020, 2022, 2028, 2023, 2024,
2025, 2026, 2027, 2029, 2030, 2034, 2036, 2038, 2040, 2042, 2044, 2046, 2048, 2054,
2056, 2058, 2027, 2124, 2130, 2134, 2140, 2144, 2154, 2170, 2200, 6091, Creative Icon,
Creative Sensation Pro, Creative Sensation, Creative Vision, Creative Performance,
Creative 1.5 / 2.0 / 3.0 / 4.0 / 4.5, Performance 5.0 / 5.2, Quilt Expression 2.0 / 3.0 / 3.2 /
4.0 / 4.2, Expression 150, Ambition 610 / 620 / 630
The Ruler foot, made from composite stainless steel, is designed to float just above the quilt sandwich, there is no hopping mechanism to get in the way of your hands or impede your vision and you can run a ruler completely around the Westalee Ruler Foot
Medium Shank Ruler Foot:
Also For Berninas, the series 7 and series 8 machines use the medium shank ruler foot with the #77 Bernina adapter.
1. Loosen the presser foot ankle screw completely and remove the ankle.
2. Place the Free Motion Ruler Foot around the presser bar, then attach it with the screw.
3. Thread your machine.
4. Select a straight stitch.
5. Set machine to Free Motion Ruler Foot mode. The feed dogs will drop automatically and the fabric will no longer fed by the machine. You must move the fabric as you sew.
6. Place the fabric under the foot and lower the foot.
7. Bring the bobbin thread to the top by taking one stitch. Hold onto both threads and sew a few stitches in place to begin.
8. Slide the edge of the ruler up to the foot. Place enough pressure on the ruler with your fingertips to gently glide the foot along the edge without the ruler moving.
9. Sew along the edge of the ruler. When near the end, stop the machine, lift the presser foot and slide the ruler into position to continue stitching the design.
10. When changing positions, stop the machine, and simply reposition the ruler and stitch in the direction needed to follow the ruler.
|
Fast Service 
